Wczytuję dane...
Poinformuj mnie gdy produkt będzie dostępny

Producent: Olimex

Gwarancja: 12 miesięcy

  • Opis produktu


  • Allwinner A20 dual core Cortex-A7 processor, each core typically running at 1GHz and dual-core Mali 400 GPU
  • 1GB DDR3 RAM memory
  • SATA connector with 5V SATA power jack
  • HDMI connector with FullHD support (1080p)
  • 2 x USB High-speed host with power control and current limiter
  • USB-OTG with power control and current limiter
  • 1000MBit native Ethernet
  • LiPo Battery connector with battery-charging capabilities
  • LCD connector compatible with with 4.3", 7.0", 10.1" LCD modules from Olimex
  • 160 GPIOs on four GPIO connectors
  • MicroSD card connector
  • DEBUG-UART connector for console debug with USB-SERIAL-CABLE-F
  • Battery charge status LED
  • Power LED
  • 2KB EEPROM for MAC address storage and more
  • 3 BUTTONS with ANDROID functionality + RESET button
  • 4 mount holes
  • 5V input power supply, noise immune design
  • PCB dimensions: 84x60 mm



  • I am an inexperienced user and I'm afraid to mess up initially. What are the most common errors in the initial start-up of the board?

    The best idea is to download the latest Debian or Android image from the wiki and to pay attention if it is for microSD card or the NAND memory. After that ensure the image is properly written to the SD card or the NAND memory. Finally, if you are expecting video output problems, ensure the image is set with the proper settings for the display/monitor you are going to use. Double check if the power supply is sufficient (especially if powering a display from the board).
  • Can I use the Debian or Android image for A20-OLinuXino-LIME or A10-OLinuXino-LIME instead of the one for A20-OLinuXino-LIME2?

    No. Both Debian and Android images are specfic for each board. Make sure the image that you download and use is specifically marked as suitable for A20-OLinuXino-LIME2. The prepared cards which we sell for the board are also different.
  • What do I need to connect one of the Olimex-made displays to the board?

    We are working on an adapter at the moment, which is yet to be released. Note that A10-OLinuXino-UEXT adapter is not suitable for A20-OLinuXino-LIME2. The layout of the LCD connector of A10-OLinuXino-LIME and A20-OLinuXino-LIME2 is different.
  • I bought a supported LCD and the required cables but when I connect it to the A20-OLinuXino-LIME2 I receive no image on the display. What do I do wrong?

    The default A20-OLinuXino-LIME2 Debian image is set for HDMI output and HD resolution. To use LCD or lower the resolution you would need to start the shell script in the default Debian image.
  • What is the operating temperature range of A20-OLinuXino-LIME2?

    The board works in the commercial temperature range 0+70C

Klienci, którzy kupili ten produkt wybrali również...








Produkt niedostępny
75,92 PLN*
*cena netto, bez podatku VAT
Produkt dostępny!
3 szt.
21,15 PLN*
*cena netto, bez podatku VAT
Produkt niedostępny
126,89 PLN*
*cena netto, bez podatku VAT
Produkt dostępny!
4 szt.
25,38 PLN*
*cena netto, bez podatku VAT
Dodaj: szt.
do koszyka
Dodaj: szt.
do koszyka
Dodaj: szt.
do koszyka
Dodaj: szt.
do koszyka